|Battery Capacity||1500-1700 mAh|
|Continuous Operation Time||Min. 12 hours|
|Connectivity with PC||USB 2.0 channel|
|Overall Dimensions||60 x 120 x 25 mm|
|Weight of Electronic Unit||120 g|
|Charging Time||4 hr|
Thickness measurement of:
Galvanic (zinc, chromium, nickel, cadmium, silver, tin and
other) coatings on steel products;
Galvanic (zinc, chromium, nickel, cadmium, silver, tin and other) coatings on products from non-ferrous metals;
Paint, lacquer, enamel, powder, mastic and other dielectric coatings on steel products;
Anodic oxide, phosphate and other dielectric coatings on ferrous and non-ferrous metals;
Special dielectric and metallic thick coatings, plated coatings
Coatings on the internal surfaces of pipes and cylindrical products
Copper foils on printed circuit boards;
Sheets of conductive non-ferrous materials and galvanic
Coatings on products from dielectric materials;
Two layers coatings;
Protective layer of concrete and determination of steel reinforcement position in concrete;
Wall thickness of large products from fiberglass and carbon
Fiber reinforced plastics during manufacture and delivery with one side and two sides access. Measurement of groove depth and evaluation of surface rough-ness after sand blasting or grit blasting. Control of climatic conditions (air humidity, air and metal surface temperature, dew point temperature and determination of TΔ pa-rameter).
TFT colour display with 2.4” diagonal and a built-in Li-Ion battery;
Shockproof ergonomic body with rubberized corners;
Keyboard with functional keys that change their purpose depending on the mode of operation of the device and user-friendly and intuitive interface;
Additional modes and device settings;
Extended set of wear-resistant ergonomic small-sized transducers;
Support for transducers with several calibration characteristics (up to 6 for PH3 series probes, up to 4 for NF-G probes, up to 2 F-G probes).
Measuring unit with transducers (number and modification depend on customer’s choice);
Set of coating thickness reference specimens and substrates reference specimens (based on selected transducers);
mini-USB — USB A type cable for connection with PC;
Coating thickness range:
0.5 μm...120 mm (depends on connected transducer)
Number of transducers:
Unlimited (according to customer’s choice)
For device: −30...+40 °C;
For transducers: −40...+50 °C (up to +350 °C for high temperature transducers)
One-point with automatic multiplicative correction
|Measuring Range||0 - 10 mm|
|Least Count||0.02 mm|
|Available Dial Gauge Size||10 mm or 20 mm|
|Available Frame Depth||50 mm and 120 mm|
|Available Model||DRS-1050, DRS-2050, DRL-1050, DRL-2050|
|Application||Paint Coating, Enamels, Plastics, Lead Lining, Rubber Lining, Glass Lining|
|Power supply||4x1.5V AA (UM-3) Battery|
|Resolution||10.01 mm (10 microns)|
|Accuracy||t 0.02(0-1) +2%(1 -5) +2.5%(5-9) + 3%(9-12)|
|Min Radius||Convex 19mm / Concave 28mm|
|Min Area Dia||25mm|
|Probe||D 30 x L 50mm|
|Supply||Dry Bat. 6f22 / 9V|
|Check||Battery to be replaced when display shows BAT|
|Work Temperature||0 to 50 deg. C|
|Size Inst||127x85x40 400 mm|
Calibration at a touch of a Button for User-Friendly Operation.
Reads any coating on a ferrous surface.
Microprocessor control for stability.
Sensor complete with the applicator for curved surface work.
Clean environment, Portable Maintanace, Free Inspection Technology.
Tar coating on Iron & Steel.
Reviewed by 2 Users
Most Relevant Reviews